Model

Standard Mode

C-2200

Capacity

VA / Watt

2.2KVA / 1320W

 Input

Nominal Voltage

 110Vac / 220Vac

Voltage Range

Acceptable Voltage Range

 110Vac ±30% /  220Vac ±30%

Frequency

 50Hz ±10%/ 60Hz ±10% Auto Sensing

Boost Transfer

 100Vac ± 2% / 200Vac ± 2%

Boost Return

   105Vac ± 2% / 210Vac ± 2%

Buck Transfer

 120Vac ± 2% / 240Vac ± 2%

Buck Return

     115Vac ± 2% / 230.0Vac ± 2%

Line Low Transfer

 85Vac ± 2% / 170Vac ± 2%

Line Low Return

 90Vac ± 2% / 180Vac ± 2%

Line High Transfer

 145Vac ± 2% / 290Vac ± 2%

Line High Return

 140Vac ± 2% / 280Vac ± 2%

 Output

Voltage

 110Vac / 220Vac ----- LCD panel

Voltage Regulation

Line Mode

 ± 15%

Battery Mode

 ± 5% RMS for entire battery voltage range

Frequency Regulation

Line Mode

 Follow Ac Line Hz

Battery Mode

 50Hz or 60Hz  ±0.1Hz

Waveform

Pure Sine wave

Power Factor

0.6

Effiecincy

> 80%

Overload Protection

Line Mode

Circuit Breaker

Battery Mode

110% ~ 150% for 30 sec. , >150% for 200ms

Transfer Time

Typical

2-4 ms.

 Battery

Battery Voltage

12Vdc

Battery Type

7AH

Battery Quantity

3pcs

Backup Time

Standard Mode

5-10 mins  ( at full load )

Recharge

Standard Mode

4 hours ( to 90% of full capactity )

Display  for LCD

LCD

UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model

LED

Normal (Green), Back up (Yellow), Fault (Red)

 Audible Alarm

Battery  Mode

 Beeping every 4 seconds

Low Battery

Beeping every 1 second

UPS Fault

Beeping Continuously

Overload

      Beeping twice per second

 Communication  Port

 RS232

 Environment

 Operation Temperature

0-40 degree C; 32-104 degree F

 Relative Humidity

0-95% non-dondensing

 Audible Noise

Less than 45dBA (at 1M)

 Physical

 Standard Mode

 Net Weigh (Kgs)

 25Kgs

 ( 110V / 220V)

 (DxWxH)mm

420*200*290

Interface

 RS232 / USB

Support Windows 95/98/NT/2000/XP, Novell , and Linux

 * Specifications are subject to change without prior notice.